Products
Product IDDP-cPCI-2601
Product Name6 Channel Function Generator / Flow Simulator
Product DescriptionDP-cPCI-2601 is a 6 Channel 2MS/s Waveform Generator with high frequency performance, versatility and compact size in an economical cPCI bus format. Signal output in the range of 10 mHz to 5 KHz with 14 bit vertical resolution makes this single slot, 6U-sized cPCI card a powerful solution to meet most demanding test stimulus.DP-cPCI-2601 uses Direct Digital Synthesis (DDS) technique to generate stable and accurate output waveforms down to 0.01 Hz resolution. DP-cPCI-2601 offers Sine, Square, Ramp, Triangle, Pulse as built-in wave shapes and user defined arbitrary waveform.DP-cPCI-2601 can frequency sweep any of its function outputs. User can sweep upwards using linear sweeps. Unlike conventional Function Generators, there are no annoying discontinuities when sweeping through the entire frequency range. Further the DDS architecture inherently allows smooth and phase-continuous sweeps over the entire range.
Key Features
  • 6 individually programmable channels for waveform generation.
  • Sine, Square, Ramp, Triangle and Pulse as built-in waveforms.
  • User defined arbitrary waveforms.
  • Programmable amplitude upto 20Vp-p in steps of 2 mV.
  • Programmable DC offset control from-10V to +10V in steps of 5 mV.
  • Linear sweep from 10 mHz to 5kHz.
  • Arbitrary waveform upto 20 kHz.
  • Profile simulation - Continuous mode. - Single shot mode.
  • 90µSec TTL trigger pulses.
  • Isolated analog outputs.
  • 500V channel to channel isolation.
  • Hot swap compliant.
  • Single slot 6U form factor.
  • Windows 2000 drivers provided.
  • RT Linux drivers provided.
Datasheet